FRONT DOOR –
Firstly if possible we remove the door and the door furniture and lay the door flat on stands. We remove any dust, dirt and flaking paint and sand the surface area to prepare for spraying.
If any repairs are needed we will fill the damage, sand level and clean. We mask off the edges, underside and any glass to protect from overspray. If any repairs were carried out these areas would be spot primed, sanded and cleaned ready for topcoat.
We then apply 2-3 coats of topcoat in your chosen colour and allow to dry. Once the paint has dried we refit the door and all furniture and the job is complete.
GARAGE DOOR –
Firstly we remove any dirt, dust, peeling or flaking paint. We then fully sand the Garage Door using professional sanding and dust extraction equipment to prepare for spraying.
We then carefully mask off all surrounding areas to protect from overspray. Any repairs that are needed are filled, sanded and primer applied. We then apply 2-3 coats of topcoat in your chosen colour and allow to cure.
Once cured we remove all masking and pack away, the job is then complete.